You’re going to want to learn how to connect an Xbox to a monitor. Not only is it a convenient way to use your Xbox console, but it’s also a great way to enhance your viewing experience. It’s a quick process, and you’ll be watching your favorite movies, shows, and games in no time.

Allow auto-low latency mode (ALLM)

If you’ve got an Xbox One or an Xbox One X, you’ll be pleased to know that you can now enable Auto Low Latency Mode (ALLM) when connecting your Xbox to a monitor. This new feature automatically adjusts display settings to on-screen content to minimize input lag and ensure smooth visual gameplay in games.

Although this mode is meant to enhance the game-playing experience, it can also significantly reduce the display quality. However, not all experiences will benefit from ALLM.

xbox one console

Photo by Billy Freeman on Unsplash

There are two ways to configure ALLM. First, you can set it up manually. Second, you can use the built-in support for ALLM on certain TVs.

To enable auto low latency mode on your TV, go to the Settings menu. From there, you’ll want to check the monitor’s OSD. Once you’ve found the setting you need, switch to the HDMI input. Then, turn on the console. You’ll need to confirm that your Xbox is connected to the monitor.

Input lag can be reduced by enabling ALLM, but the amount of processing required may vary. Some TVs are already supported by all sources, while others require more work from the video processor.

All major gaming consoles have ALLM, but not all televisions have it. LG leads on this feature.

Switch to the relevant HDMI input source

If you’re connecting your Xbox to your monitor, you’ll need to understand which HDMI input source you need to use. You may have several options depending on the model of your TV and the game console you’re using. In addition, there are some steps you can take to fix some common issues with HDMI connections.

First, check your monitor’s OSD. It may have a section that lists the monitor’s features. For example, some of the best monitors include a virtual 4k feature. This is a lesser resolution than the actual 4K resolution, but it can help you see the full 0 to 255 RGB range.

Once you know which HDMI input source you need, you can connect the cable from your Xbox to your monitor. Some of the monitors will have a built-in speaker to transmit the audio from your Xbox.

Another common feature you’ll want to know about is Consumer Electronic Control (CEC). This feature has been on Xbox consoles for years and allows you to control a variety of devices, including your TV, with the Xbox remote.

You can also change your volume and turn on other devices through the CEC menu. As well, you can switch your TV input with your controller. However, some of these features will only work if you use a TV that supports it.

person playing in xbox console

Photo by Dimitris Chapsoulas on Unsplash

Allow 4K on Xbox 360

If you have an Xbox 360, you can now connect it to a monitor with 4K resolution. That means you can watch everything in a whole new level of detail and clarity.

The process of connecting an Xbox to a monitor with 4K is a little more complicated than a conventional HDTV setup. First, you need to make sure your Xbox is set to HDMI 2.0. This will ensure that the resolution you’re seeing is native to the monitor, rather than a downscaled version. You can also choose to enable 4K and HDR, which will improve the visual quality of your content.

When you’re setting up your Xbox, you’ll want to check to see if the monitor you’re using supports the HDR feature. If it does, you can use the Auto HDR feature to automatically upscale your content to HDR.

There are three different video modes available for your Xbox. The first is Auto HDR, which artificially upscales your content to HDR, while the second is TV mode. These modes are important because they allow you to verify the fidelity of your video.

Your Xbox will also tell you whether your monitor is capable of supporting 4K and 120Hz. However, this won’t happen if your HDMI connection has a bandwidth pipeline that is less than 18Gbps. If it is, you’ll need to adjust your settings to increase the amount of bandwidth you can use.